(with auto-cutter)
The LTPG247 and CAPG247 (with auto-cutter) are small footprint, high performance, 24V 2“ direct thermal printer mechanisms. With EZ-OP clamshell paper replacement, these proven mechanisms are ideal for integrating into point-of sale systems, medical devices, test and measurement hardware, and more. Both models can be integrated with either the IFG001 interface board or the PTG00P01 processor, adding design flexibility to meet individual mechanical and electrical design requirements.
- 150 mm/sec print speed
- Temperature, platen position, out of paper, and cutter position sensors.
- Small footprint design
- Choice of interface board or processor
Downloads *registered users
Product Specifications
| Model |
|
LTPG247 |
CAPG247 |
| Printing |
Method |
Thermal line dot printing |
| Number of dots/ line |
432 |
| Resolution (dots/mm) |
8 |
| Paper width (mm) |
58 |
| Printing width(mm) |
54 |
| Max speed (mm/sec) |
150 |
| Paper path |
Curved |
| Detection |
Head temperature |
By thermistor |
| Platen position detection |
By mechanical switch |
| Out of paper detection |
By photo interrupter |
| Cutter home position |
By mechanical switch |
- |
| Power supply(V) |
Operation voltage (Vdd) |
3.14 to 3.46 / 4.75 to 5.25 |
| Operation voltage (Vp) |
21.6 to 26.4 |
| Peak current(A) |
Head |
5.2 (26.4V/288dots) |
| Motor |
0.4 / 0.55 * |
| Cutter |
0.5 |
- |
| Cutting |
Method |
Slide type |
- |
| Paper thickness (μm) |
54 to 80 ** |
- |
| Cutting type |
Full cut / Partial cut (Leave center point) |
- |
| Operating time (max sec/cycle) |
0.5 |
- |
| Cutting pitch (min mm) |
10 |
- |
| Cut frequency (max cuts/min) |
30 |
- |
| Service life |
Pulse activation (pulse) |
100 million |
| Abrasion resistance (km) |
100** |
| Life (cut) |
1,000,000 |
- |
| Operating temperature(°C) |
0 to 50 |
| Dimensions(W x D x H mm) |
80.5 x 65.0 x 22.2 *** |
79.5 x 43.0 x 17.4 *** |
| Mass(g) |
Approx.180 |
Approx.80 |
Interface Board
| Model |
IFG001-01SK |
IFG001-01UK |
| CPU |
PTG00P01 |
| Thermal Printer |
CAPG247, LTPG247 |
| Operating voltage (V) |
Vp:21.6 to 26.4 |
| Character matrix (H x W dots) |
16 dots characters : 16x8, 16x16 |
| 24 dots characters : 24x12, 24x24 |
| Character type |
Optional Font |
Yes |
Yes |
| Downloaded Character |
Yes |
Yes |
| User-defined Character |
Yes |
Yes |
| Extend graphics character set |
Yes |
Yes |
| Katakana character set |
Yes |
Yes |
| JIS 1&2 level Kanji |
Yes |
Yes |
| Interface |
Serial (RS-232C) |
USB |
| Dimensions (W x D x H mm) |
75.0 x 75.0 x 16.0 |
CPU
| Model |
PTG00P01 |
| Thermal Printer |
CACG247, LTPG247 |
| Package form |
128pin QFP |
| Operating voltage(V) |
Vp: 21.6 to 26.4 |
| Vcc: 3.0 to 3.6 |
| Operating frequency(MHz) |
18.43 +/- 0.5% |
| Configuration |
C-MOS LSI |
| Input method |
Parallel, Serial, USB |
| Character type |
Extended graphics character set |
| Other characters is availabe with CGs* or external ROM |
| Character matrix(H x W dots) |
16dots characters : 16 x 8, 16 x 16 |
| 24dots characters : 24 x 12, 24 x 24 |
| Dimensions(W x D x H mm) |
22.0 x 16.0 x 3.15 |