LTP04

Maximum printing speed: 9.84 inch (250mm) /sec
Heavy-duty: 93.2 miles (150km), 2 million cuts
Easy maintenance: Major parts are replaceable without tools

LTP04
Technical Specifications
Model LTP04-347
Printing Method Thermal line dot printing
Number of dots/line 576
Resolution 203 dpi (8 dpmm)
Paper width 3.15 inch (80mm)
Printing width 2.83 inch (72mm)
Speed (max/sec) 9.84 inch (250mm)
Detection Head temperature By thermistor
Platen position By mechanical switch
Out of paper By photo interrupter
Power supply (V) Operating voltage (Vdd) 3.0 to 3.6
Operating voltage (Vp) 21.6 to 26.4
Peak current (A) Head 16.7 (26.4V / 384 dots)
Motor 1.0
Service life Pulse activation (pulse) 150 million *1
Abrasion resistance 93.2 miles (150km) *1
Operating temperature 32 to 122 °F (0 to 50 °C)
Dimensions (WxDxH) 5.02 x 3.27 x 1.74 inch (127.6 × 83.0 × 44.1 mm)
(2.20 inch (55.95mm) with auto cutter) *2
Mass Approx. 0.88 lbs (400g)
*1 Use recommended thermal papers.
*2 Excluding protrusion.
Auto Cutter Specifications
Model ACU04-37
Thermal printer LTPO4-347
Cutting Method Slide type
Paper width 3.15 inch (80mm)
Paper thickness (μm) 60 to 80 *3
Cutting type Partial cut (Leave center point)
Operating time (sec/cycle) max 0.4 (24V)
Cutting pitch min 0.39 inch (10mm)
Cut frequency (cut/min) max 30
Operating voltage (V) Motor 21.6 to 26.4
Detector (control switch) 3.0 to 5.0
Starting current (A) 1.3
Life (Cut) 2,000,000 *4
Dimensions (W×D×H) 3.76 x 1.54 x 0.64 inch (95.6 × 39.0 × 16.2 mm)
Mass Approx. 0.22 lbs (100g)
*3 Use recommended thermal papers.
*4 Depending upon specified conditions.