New 24V LTPD and CAPD (with auto-cutter) series printer mechanisms help engineers solve the challenges of designing smaller, more robust, more reliable devices. And by offering greater design flexibility and industry leading value, these embedded printers are the ideal solution for meeting aggressive product release timelines and cost targets.

Small Form Factor

LTPD and CAPD series mechanisms free up critical design real estate. The new mechanisms offer a smaller overall form factor, innovative angled paper guide that requires less depth, and a smaller pitch flexible print circuit (FPC) cable.

Proven Reliability

LTPD and CAPD models are rated for a minimum of 100 km total printing and 100 million pulses for long life reliability. CAPD models offer a new built-in auto-cutter design, improving cutter reliability. The result: reliable media output, every time.

Design Flexibility

An array of form factor choices provides more flexibility for a smoother integration process. Options include, ASIC and interface board solutions, and both horizontal and vertical mechanical orientation designs.

Product Highlights

  • 2″ and 3″ print width models
  • Choice of horizontal and vertical orientations
  • EZ-OP clamshell-style paper replacement
  • Platen latch for better shock absorption
  • Available built-in auto-cutter (CAPD models)
2-inch horizontal model
2-inch model with auto-cutter, platen released

LTPD and CAPD Series Downloads

Technical Specifications
PrintingMethodThermal line dot printing
Number of dots/line432576432576
Resolution203 dpi (8 dpmm)
Paper width2.28 inch (58mm)+-3.15 inch (80mm)+-2.28 inch (58mm)+-3.15 inch (80mm)+-
Printing width2.13 inch (54mm)2.83 inch (72mm)2.13 inch (54mm)2.83 inch (72mm)
Speed (max/sec)7.87 inch (200mm)6.69 inch (170mm)7.87 inch (200mm)6.69 inch (170mm)
Paper pathCurved
SensorsHead temperatureBy thermistor
Platen position detectionBy mechanical switch
Out of paper detectionBy photo interrupter
Cutter home position detectionBy photo interrupterBy photo interrupter
Power supply (V)Operation voltage (Vdd)2.7 to 3.6 / 4.75 to 5.25
Operation voltage (Vp)21.6 to 26.4
Peak current (A)Head2.61 (26.4V / 144dots)
5.23 (26.4V / 288dots)
Service lifePulse activation (pulses)100 million
Abrasion resistance62.1 miles (100km) *1
Operating temperature14 to 122 °F (-10 to 50 °C)
Dimensions (WxDxH)Horizontal2.80 x 1.18 x 0.59 inch (71.0 x 30.0 x 15.0 mm) *23.58 x 1.18 x 0.59 inch (91.0 x 30.0 x 15.0 mm) *23.27 x 1.39 x 1.06 inch (83.1 x 35.4 x 26.9 mm) *24.14 x 1.39 x 1.06 inch (105.1 × 35.4 × 27.2 mm) *3
Vertical2.80 x 0.59 x 1.18 inch (71.0 x 15.0 x 30.0 mm) *23.58 x .59 x 1.18 inch (91.0 x 15.0 x 30.0 mm) *23.27 x 1.39 x 1.06 inch (83.1 x 35.4 x 26.9 mm) *24.14 x 1.39 x 1.06 inch (105.1 × 35.4 × 27.2 mm) *3
MassApprox. 0.12 lbs (56g)Approx. 0.14 lbs (64g)Approx. 0.29 lbs (131g)Approx. 0.34 lbs (154g)
Auto-cutterMethodSlide cutting
Paper thickness (μm)54 to 9054 to 78
Cutting typeFull cut and partial cut (1.5+-0.5mm tab left at the center)
Operating time (max sec/cycle)0.5
Minimum paper cutting length0.93 inch (10mm)
Cutting frequency (max cuts/min)30
Life spanPaper cutting (cuts)700,000 *1

*1 Use recommended thermal paper. *2 Excluding convex section. *3 Excluding mounting part.

Interface Board Specifications
Thermal PrinterLTPD247, LTPD347, CAPD247, CAPD347
Operating voltage (V)Vp: 21.6 to 26.4
Character matrix (HxW dots)16 dots characters: 16 X 8, 16 X 16 24 dots characters: 24 X 12, 24 X 24
Character typeExtended graphics character set, Katakana character set 1, Katakana character set 2, Codepage 1252, User page, Downloaded character, Optional font, JIS 1st and 2nd level kanji, User-defined character
InterfaceUSB (2.0)Serial (RS-232C)
Dimensions (WxDxH)2.72 x 1.97 x 0.55 inch (69.0 X 50.0 X 14.0 mm)
CPU Specifications
Thermal PrinterLTPD247, LTPD347, CAPD247, CAPD347
Package form120 pin QFP
Operating voltage (V)Vp: 21.6 to 26.4, Vcc: 3.0 to 3.6
Operating frequency (MHz)12MHz ± 0.01%
ConfigurationC-MOS LSI
Input MethodParallel, Serial, USB
Character typeExtended graphics character set. Other characters available with CGs*3 or external memories.
Character size16 dot character: 16 x 8, 16 x 16 24 dot character: 24 x 12, 24 x 24
Dimensions (WxDxH)0.63 x 0.63 x 0.07 inch (16.0 x 16.0 x 1.7 mm)
SoftwarePrinter Driver/SDK, OPOS Driver, POS for .NET Driver, Linux® CUPS Filter/SDK
*3 CG ROM: Japanese
Optional Cables
Power CableDC-04100A-E
Switch CableOC-D1430A-E
Serial CableOC-D0730A-E
USB CableIFC-U01-1-E