LTP2000 Series
The versatile LTP2000 direct thermal printer mechanism series delivers exceptional value with proven 2″, 3″ and 4″ models. The ability to print both receipts and labels, coupled with straight and curved paper path alternatives, and an auto-cutter rated for up to 300,000 cuts, enables these units to tackle the broadest array of applications, including medical devices, kiosks, point of sale systems, and more.
Product Highlights
- 90 mm/sec print speed
- Choice of interface board or processor, adding design flexibility
- Label and receipt printing support
LTP2000 Series Details
LTP2000 Series Downloads
Documentation & Warranty
| LTP2000 Series Technical Specifications | ||||
|---|---|---|---|---|
| Model | LTP2242 | LTP2342 | LTP2442 | |
| Printing | Method | Thermal line dot printing | ||
| Number of dots/line | 432 | 576 | 832 | |
| Resolution (dots/mm) | 8 | |||
| Paper width (mm) | 60 | 80 | 112 | |
| Printing width (mm) | 54 | 72 | 104 | |
| Speed (max mm/sec) | 90 | 75 | ||
| Paper path | Straight / Curved | |||
| Sensors | Head-up detection | By thermistor | ||
| Platen position detection | By mechanical switch | |||
| Power supply (V) | Operation voltage (Vp) | 21.6 to 26.4 | ||
| Operation voltage (Vdd) | 4.75 to 5.25 | |||
| Out of paper detection | By photo interrupter | |||
| Peak current (A) | Head | 4.3(26.4V/288 dots) | ||
| Motor | 0.5 | |||
| Service life | Pulse activation | 100 million | ||
| Abrasion resistance (km) | 50* | |||
| Operating temperature (°C) | 0 to 50 | |||
| Dimensions(W x D x H mm) | 85.2 X 61.4 X 27.0 * | 106.4 X 61.4 X 27.0 * | 138.2 X 61.4 X 27.0 * | |
| Mass(g) | Approx.115 | Approx.135 | Approx.160 | |
| Interface Board Specifications | ||
|---|---|---|
| Model | IF2305-01B-E | |
| CPU | PT230P01 | |
| Operating voltage (V) | Vp:21.6 to 26.4, Vcc:4.5 to 5.5 | |
| Character matrix (HXW dots) | 16 dots characters: 16X8,16X16 | |
| 24 dots characters :24X12,24X24 | ||
| Character type | Optional font | Yes |
| Downloaded character | Yes | |
| User-defined character | Yes | |
| Extend graphics character set | Yes | |
| Katakana character set | No | |
| JIS 1&2 level Kanji | No | |
| Input Method | Parallel, Serial (C-MOS) | |
| Dimensions (W x D x H mm) | 90.0 X 100.0 X 22.0 | |
| CPU Specifications | |
|---|---|
| Model | PT230P01 |
| Package form | 128pin QFP |
| Operating voltage (V) | Vp:21.6 to 26.4, Vcc:4.5 to 5.5 |
| Operating frequency (MHz) | 18.43 +/- 0.5% |
| Configuration | C-MOS LSI |
| Input method | Parallel, Serial |
| Character type | Extended graphics character set, |
| Other characters is available with CGs* or external RAM | |
| Character matrix (H x W dots) | 16 dot characters : 16 x 8, 16 x 16 |
| 24dot characters : 24 x 12, 24 x 24 | |
| Dimensions (W x D x H mm) | 22.0 X 16.0 X 3.1 |
| Auto-Cutter Specifications | |||
|---|---|---|---|
| Model | ACU2224 | ACU2324 | |
| Cutting | Method | Slide type | |
| Paper width (mm) | 60 | 80 | |
| Paper thickness (μm) | 65 to 125 * | ||
| Cutting type | Full cut / Partial cut(Leaving center point) | ||
| Operating time (max sec/cycle) | 0.5 | ||
| Cutting pitch (min. mm) | 10 | ||
| Cut frequency (max cut/min) | 30 | ||
| Operating voltage (V) | Motor | 21.6 to 26.4 | |
| Detector (control switch) | 4.75 to 5.25 | ||
| Starting Current (A) | 1.2 | ||
| Life (cut) | 300,000 | ||
| Dimensions (W x D x H mm) | 79.0 X 66.5 X 16.5 | 100.0 X 66.5 X 17.0 | |
| Mass (g) | Approx.120 | Approx.200 | |
* Use recommended thermal paper
** Excluding protrusion
