LTP1245
The LTP1245 2“ direct thermal printer mechanism is designed for portable printing applications. This innovative product features a paper feed knob, “circular” type auto-cutter, and choice of curved or straight paper path orientation, for added design flexibility. The LTP1245 can also be configured with either the IF1101 interface board or the PT110P01 or PT120P02 processor, each supporting Serial and Parallel interface connectivity.
Product Highlights
- Low operating voltage for longer battery life
- Compact and light-weight
- Paper feed knob model available
- Straight and curved path models for maximum design flexibility

LTP1245 Downloads
Technical Specifications | ||
---|---|---|
Model | LTP1245 | |
Printing | Method | Thermal line dot printing |
Number of dots/line | 384 | |
Resolution (dots/mm) | 8 | |
Paper width (mm) | 58 | |
Printing width (mm) | 48 | |
Max speed (mm/sec) | 62.5 | |
Paper path | Curved/Straight | |
Detection | Head temperature | By thermistor |
Head up detection detection | By photo interrupter | |
Out of paper detection | By photo interrupter | |
Power supply (V) | Operating voltage (Vdd) | 4.5 to 5.5 |
Operating voltage (Vp) | 4.2 to 8.5 | |
Peak current (A) | Head | 2.7(8.5V/64 dots) |
Motor | 0.46 | |
Service life | Pulse activation | 100 million |
Abrasion resistance (km) | 50* | |
Operating temperature (°C) | 0 to 50 | |
Dimensions (WxDxH mm) | 72.0 x 39.5 x 16.0** | |
Mass (g) | Approx. 45 |
Interface Board Specifications | |||
---|---|---|---|
Model | IF1101-01B | IF1101-01BK | |
CPU | PT110P01 | ||
Operating voltage (V) | Vp:4.2 to 8.5, Vcc: 4.5 to 5.5 | ||
Character matrix (H x W dots) | 16 dot characters: 16 x 8, 16 x 16 | ||
24 dot characters: 24 x 12, 24 x 24 | |||
Charatcter type | Optional font | Yes | Yes |
Downloaded character | Yes | Yes | |
User-defined character | Yes | Yes | |
Extended graphics character set | Yes | Yes | |
Katakana character set | No | Yes | |
JIS 1&2 level Kanji | No | Yes | |
Interface | Parallel, Serial (C-MOS) | ||
Dimensions (WxDxH mm) | 70.0 x 100 x 11.6 |
CPU Specifications | ||
---|---|---|
Model | PT110P01 | PT120P02 |
Package form | 128 pin QFP | 80 pin QFP |
Operating voltage (V) | Vp: 4.2 to 8.5, Vcc: 4.5 to 5.5 | |
Operating frequency (MHz) | 18.43 + .5% | 5 + .5% |
Configuration | C-MOS LSI | |
Interface | Parallel, Serial | |
Character type | Extended graphics character set, other characters available with CGs* or external ROM | |
Character matrix (H x W dots) | 16 dot characters : 16 x 8, 16 x 16, 24 dot characters : 24 x 12, 24 x 24 | |
Dimensions (W x D x H mm) | 22.0 x 16.0 x 3.1 | 17.2 x 17.2 x 1.7 |
Auto-Cutter Specifications | |||
---|---|---|---|
Model | ACU6205A | ACUH205B | |
Cutting | Method | Circular type | |
Paper width (mm) | 58 | ||
Paper thickness | 54 to 75 | ||
Cutting type | Full cut | Partial cut (Right side edge remains) | |
Operating time (max sec/cycle) | 0.6 (operating voltage 6.0V, 25 °C) | ||
Cut frequency (max cuts/min) | 30 | ||
Cutting pitch | 10 | ||
Operating voltage | Motor | 4.2 to 6.0 | |
Detector (control switch) | 4.5 to 5.5 | ||
Starting current (A) | 1.0 (5V on) | ||
Life(cut) | 300,000 | ||
Dimensions (W x D x H mm) | 81 x 54.0 x 12.0 | ||
Mass (g) | Approx. 50 |
* Use recommended thermal paper
** Excluding protrusion
** Excluding protrusion