LTPH245
The LTPH245 2″ direct thermal print mechanism is designed specifically for portable printing applications. Included is the ACUH205A “circular” type auto-cutter. For maximum design flexibility, this mechanism is available with either the IFH002 interface board or the PTH01P02 processor, both supporting Serial and Parallel interface connectivity.
Product Highlights
- Low operating voltage for longer battery life
- EZ-OP clamshell paper replacement
- Platen latch function
LTPH245 Downloads
| Technical Specifications | ||
|---|---|---|
| Model | LTPH245 | |
| Printing | Method | Thermal line dot printing |
| Number of dots/line | 384 | |
| Resolution (dots/mm) | 8 | |
| Paper width (mm) | 58 | |
| Printing width (mm) | 48 | |
| Max speed (mm/sec) | 62.5 | |
| Paper path | Curved | |
| Detection | Head temperature | By thermistor |
| Platen position detection | By mechanical switch | |
| Out of paper detection | By photo interrupter | |
| Power supply (V) | Operating voltage (Vdd) | 4.5 to 5.5 |
| Operating voltage (Vp) | 4.2 to 8.5 | |
| Peak current (A) | Head | 2.7(8.5V/64 dots) |
| Motor | 0.46 | |
| Service life | Pulse activation | 100 million |
| Abrasion resistance (km) | 50* | |
| Operating temperature (P52) | 0 to 50 | |
| Dimensions (WxDxH mm) | 69.2×28.3×31.7** | |
| Mass (g) | Approx. 41 | |
| Interface Board Specifications | |||
|---|---|---|---|
| Model | IFH002-01B | IFH002-01BK | |
| CPU | PTH01P02 | ||
| Operating voltage (V) | Vp:4.2 to 8.5, Vcc: 4.5 to 5.5 | ||
| Character matrix (H x W dots) | 16 dot characters: 16 x 8, 16 x 16 | ||
| 24 dot characters: 24 x 12, 24 x 24 | |||
| Charatcter type | Optional font | Yes | Yes |
| Downloaded character | Yes | Yes | |
| User-defined character | Yes | Yes | |
| Extended graphics character set | Yes | Yes | |
| Katakana character set | No | Yes | |
| JIS 1&2 level Kanji | No | Yes | |
| Interface | Parallel, Serial (C-MOS) | ||
| Dimensions (WxDxH mm) | 70.0 x 70.0 x 11.3 | ||
| CPU Specifications | |
|---|---|
| Model | PTH01P02 |
| Package form | 80 pin QFP |
| Operating voltage (V) | Vp: 4.2 to 8.5, Vcc: 4.5 to 5.5 |
| Operating frequency (MHz) | 5 + .5% |
| Configuration | C-MOS LSI |
| Interface | Parallel, Serial |
| Character type | Extended graphics character set, other characters available with CGs* or external ROM |
| Character matrix (H x W dots) | 16 dot characters : 16 x 8, 16 x 16, 24 dot characters : 24 x 12, 24 x 24 |
| Dimensions (W x D x H mm) | 17.2 x 17.2 x 1.7 |
| Auto-Cutter Specifications | ||
|---|---|---|
| Model | ACUH205A | |
| Cutting | Method | Circular type |
| Paper width (mm) | 58 | |
| Paper thickness | 60 to 80* | |
| Cutting type | Partial cut (Right side edge remains) | |
| Operating time (max sec/cycle) | 0.8 (operating voltage 5.0V, 25 °C) | |
| Cut frequency (max cuts/min) | 20 | |
| Operating voltage | Motor | 4.2 to 8.5 |
| Detector (control switch) | 4.5 to 5.5 | |
| Starting current (A) | 1.26 (6V on) | |
| Life(cut) | 500,000 | |
| Dimensions (W x D x H mm) | 91 x 47.6 x 12.7 | |
| Mass (g) | Approx. 46 | |
* Use recommended thermal paper
** Excluding protrusion
** Excluding protrusion